How to Connect a Water Tank to Your Roof for Rainwater Harvesting?

How to Connect a Water Tank to Your Roof for Rainwater Harvesting

Water is an essential element in our lives and water storage has become a topic of relevance. Rainwater harvesting is an effective way to collect rainwater from your house or shed roof. While you have to connect the harvesting fixtures to an external water tank and a filtration system, we should mention at the outset that it is fairly simple to attach a water tank to your roof. You need to keep a few simple tips and best practices in mind to ensure proper installation and clean harvesting of water.

The process of installing a Plastic Water Storage Tank 1000 ltr for rainwater harvesting and water storage can be broken down into a few simple steps.

Preparation of the base

A strong foundation is a prerequisite for any major construction of the installation. The base for your water storage tank can be of two kinds:

Concrete Base: Concrete is poured to create reinforced concrete that is flat, level, not slanted, and most importantly is at least larger than the diameter/base dimension of the water storage tank. It so happens sometimes that the ground or soil base where the concrete is poured is soft and when the weight of the concrete, Water Tank, and water is put on it, it buckles under the pressure. Hence, you must also compact the soil base before starting the installation.

Compacted Material Base: In this kind of base preparation, a pad of compacted crusher dust of road base is created. This kind of base is ideally at least 24 inches wider than the base dimension of the rainwater harvesting tank. You must make sure that the base is also free of any sharp objects or protrusions like rocks, stones, a foreign matter that could potentially damage the water storage tank. The base should be compacted throughout. It should also be level and flat. Erosion is a worry this base. Therefore, you must ensure that there is a retaining wall or boundary that protects the base from erosion.

Installation of the Overflow Drainage Pipe

The overflow drainage piping must be connected then to the stormwater drainage system. If not, the pipe should take the water far from the rainwater harvesting water storage tank so that the base is safe.

Installation of the Fill Pipes

The final step of connecting your 1000 litre water tank price to your roof is the installation of fill pipes. These pipes connect the tank lid to the roof or shed. It is also important to note that the water that you are harvesting must be filtrated for safe consumption. Therefore proper filtration systems should also be installed at this stage to ensure that the water reaching your home is safe to consume.

RELATED POST:

Which Water Tank Is The Best For You?

Stay Ready For Emergencies With Sheetal Water Storage Tanks